We recommend
New
![8MPX panoramic IP camera with Deep Learning-based image analysis and active deterrence](http://www.novuscctv.com/sites/default/files/styles/category_list_thumbnail_small/public/aat/image/image/NVIP-8VE-4501P_FWLAD_SKOS_0.png)
8MPX panoramic IP camera with Deep Learning-based image analysis and active deterrence
NVIP-8VE-4501P/WLAD
The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition
The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording
Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.
Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.
The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.
The ONVIF standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the ONVIF standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.
Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object
Video | |
---|---|
IP Cameras | up to 4 channels at 3840 x 2160 resolution (video + audio) |
Maximum Supported Camera Resolution | 3840 x 2160 |
Compression | H.264, H.264+, H.265 |
Monitor Output | main (split screen, full screen, sequence): 1 x HDMI (4K UltraHD), 1 x VGA (up to 2 monitors simultaneously) |
Dualstreaming Support | yes |
Audio | |
Audio Input/Output | - / 1 x line-out (RCA) |
Recording | |
Stream Size | 40 Mb/s in total from all cameras |
Recording Mode | continuous, triggered by: manual, motion detection |
Prealarm/Postalarm | up to 5 s/up to 600 s |
Display | |
Display Speed | 120 fps (4 x 30 fps) |
Playback | |
Playback Speed | 120 fps (4 x 30 fps) |
Recorded Data Search | by date/time, events |
Backup | |
Backup Methods | USB port (HDD or Flash memory), network |
Backup File Format | AVI, RPAS (player included) |
Storage | |
Internal Storage | available mount: 1 x HDD 3.5” 10 TB SATA |
Total Internal Capacity | 10 TB |
Alarm | |
Camera Alarm Input/Output | supports IP camera’s alarm input/output |
Motion Detection | supports camera’s motion detection |
System Reaction to Alarm Events | buzzer, recording activation, PTZ, e-mail with atatchment |
Intelligent image analysis | |
Supported Functions | Exception, Scene Change, Video Blurred, Video Color Cast, Tripwire, Zone entrance, Abandoned Object, Object Disappearance |
Network | |
Network Interface | 1 x Ethernet - RJ-45 interface, 10/100 Mbit/s 4 x Ethernet PoE (IEEE802.3af, Class 3) - RJ-45 interface, 10/100 Mbit/s |
Network Protocols Support | HTTP, TCP/IP, IPv4, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, SMTP |
Mobile applications | SuperLive Plus (iPhone, Android) |
Number of Simultaneous Connections | up to 5 clients, up to 8 main streams or 16 substreams or 4 playback streams in total |
Bandwidth | 40 Mb/s in total to all client workstations |
PTZ | |
PTZ Functions | pan/tilt/zoom, preset commands |
Auxiliary Interfaces | |
USB Ports | 2 x USB 2.0 |
Operating system | |
Operating System | Linux |
Operation Mode | triplex |
OSD | languages: Polish, English, others |
Control | PC mouse and IR remote controller (in-set included), network |
System Diagnostic | automatic control of: HDDs, network, camera connection loss |
Security | password protection, IP filtering, MAC filtering |
Installation parameters | |
Dimensions (mm) | 300 (W) x 52 (H) x 248 (D) |
Weight | 1.16 kg (without HDD) |
Power Supply | 100 ~ 240 VAC |
Power Consumption | 12 W (with 1 HDD) + 36 W PoE |
Operating Temperature | -10°C ~ 50°C |