We recommend
New
![8MPX panoramic IP camera with Deep Learning-based image analysis and active deterrence](https://www.novuscctv.com/sites/default/files/styles/category_list_thumbnail_small/public/aat/image/image/NVIP-8VE-4501P_FWLAD_SKOS_0.png)
8MPX panoramic IP camera with Deep Learning-based image analysis and active deterrence
NVIP-8VE-4501P/WLAD
The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition
The camera uses HTML5 standard (programming language) to display the image in the browser.
This allows to configure and display stream from camera not only from Internet Explorer, but in all popular browsers, like Opera, Firefox, Edge or Chrome. Thanks to HTML5, the user can safely and conveniently connect to the camera, the high performance of HTML5 protocol allows to high definition video display without lag and with moderate consumption of computer resources.
The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording
Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.
Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.
The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.
The ONVIF standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the ONVIF standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.
Improved coding standard allowing even more efficient use of the transmission bandwidth. The mechanism is based on the use of frame elements virtualization, which allows for the partial prediction of the recorded image, thus the overall packet traffic in the network is reduced.
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object
Video | |
---|---|
Video Input | 16 x BNC |
Operating mode | AHD 5Mpx, TVI 5Mpx, CVI 5Mpx, analog 960H |
Monitor Output | main (split screen, full screen, sequence): 1 x HDMI (FullHD), 1 x VGA (FullHD), 1 x BNC, spot: 1 x BNC interchangeably to main output |
IP Streams | hybrid mode: 16 x BNC + 8 x IP IP mode: 8 x BNC + 16 x IP |
Supported IP resolution | max. 2592 x 1944 |
Audio | |
Audio Input/Output | 1 x RCA (Line-in)/1 x HDMI, 1 x RCA |
Recording | |
Compression | H.264, H.265, H.265+ |
Recording Speed | 480 fps (960 x 576 - 960H) 480 fps (960 x 1080 - 1080p Lite) 240 fps (1920 x 1080 - FullHD) 240 fps (1280 x 1440 - 4Mpx Lite) 160 fps (1280 x 1944 - 5Mpx Lite) |
IP recording speed | hybrid mode: 240fps IP mode: 480fps |
IP stream size | hybrid mode: 32 Mb/s in total from all IP cameras IP mode: 64 Mb/s in total from all IP cameras |
Recording Mode | continuous, triggered by: REC/PANIC button, alarm input, motion detection, image analysis |
Schedule | individual settings for: each camera, each day of the week, configuration with an accuracy of: 1 min, possibility of combining individual recording modes |
Prealarm/postalarm | up to 5 s/up to 10 min |
Playback | |
Playback speed | 480 fps |
IP playback speed | 480 fps |
Recorded Data Search | by date/time, events, image analysis events, motion in a defined area, tags |
Backup | |
Backup Methods | USB port (HDD or Flash memory), network |
Backup File Format | AVI, RPAS (player included) |
Storage | |
Internal storage | available mount: 1 x HDD 3.5” SATA |
Total Internal Capacity | 10 TB |
Alarm | |
IP Camera Alarm Input/Output | supports IP camera’s alarm input/output |
Motion Detection | 18 x 22 grid, individual settings of sensitivity |
System Reaction to Alarm Events | buzzer, e-mail, alarm output activation, recording activation, PTZ, Full Screen, PUSH message, snapshot |
Intelligent image analysis | |
Supported functions for analog cameras | Line cross, Zone entrance, Smart Motion Detection |
Supported functions for IP cameras | Object detection, Exception, Scene change, Video blurred, Video color cast, Line cross, Zone entrance, Abandoned object, Object disappearance |
Network | |
Network Interface | 1 x Ethernet - RJ-45 interface, 10/100 Mbit/s |
Network Protocols Support | HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, IEEE 802.1X, PPPoE, SMTP, P2P, POS, HTML5 |
PC/MAC Software | NOVUS MANAGEMENT SYSTEM VSS, NOVUS MANAGEMENT SYSTEM AC, NMS, Internet Explorer, Firefox, Chrome, Opera, N Control 6000, Edge/Safari, N Control 6000 |
Mobile applications | N-VID6 (iPhone, Android) |
Number of Simultaneous Connections | up to 10 (live monitoring: 10, playback: 10, configuration: 10) , live monitoring up to 28 mainstreams, 96 substreams, playback up to 16 streams |
Bandwidth | 80 Mb/s in total to all client workstations |
PTZ | |
PTZ Ports | 1 x RS-485 |
PTZ Protocols | Pelco-D, Pelco-P |
PTZ Functions | pan/tilt/zoom, preset commands, patterns |
COAX | |
COAX Functions | menu, zoom, focus, PTZ |
Auxiliary Interfaces | |
USB Ports | 2 x USB 2.0 |
Operating system | |
Operating System | Linux |
OSD | languages: Polish, English, Russian, others |
Control | IR remote controller, PC mouse (in-set included), network |
System Diagnostic | automatic control of: HDDs, camera connection loss |
Security | password protection, IP filtering, MAC filtering |
Installation parameters | |
Dimensions (mm) | 255 (W) x 42 (H) x 234 (D) |
Weight | 0.89 kg (without HDD) |
Power Supply | 12 VDC (100 ~ 240 VAC/12 VDC PSU in-set included) |
Power Consumption | 20 W (with 1 HDD) |
Operating Temperature | -10°C ~ 50°C |