Speed Dome IP Camera with intelligent object tracking
The recorder is dedicated to work with NOVUS 6000 series IP cameras. Detailed data can be found in the compatibility table available in the DOWNLOADABLE FILES tab.
Improved video stream encoding type based on creating virtual base frames, and dynamic realocate bits in stream structure. The algorithm allows 30% bandwidth saving compared to H.265 +, up to 50% compared to H.265.
Image analysis function based on Deep Learning, allows to detect the faces of people in the detection zone. After detecting a face, the camera can trigger an alarm or, if it is connected to a recorder with the face recognition function, it can send data allowing for the identification of the detected face.
The license plate recognition system based on the 6000 series recorder and NVIP-2H-6732M/LPR camera allows you to open the gate/barrier according to vehicle database. Each recognition is saved as a snapshot of the licence plate image (which is automatically linked to a fragment of the recording), which facilitates the subsequent verification of entries. The configuration of the camera, database and the search for license plates is done from the recorder and web browser.
The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- face recognition
The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording
Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.
Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.
The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.
The ONVIF standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the ONVIF standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.
Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
- leaving luggage at train stations, metro stations
- places with a parking ban
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
- protection of museum exhibits
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
- perimeter protection of the object
- protection of strategically important objects
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
- perimeter protection of the object
up to 32 channels at 4000 x 3000 resolution (video + audio)
|Maximum Supported Camera Resolution|
4000 x 3000
H.264, H.264+, H.265, H.265 Smart
main (split screen, full screen, sequence): 1 x HDMI (4K UltraHD) / VGA (up to 2 monitors simultaneously)
spot: 1 x HDMI (FullHD)
yes, 6000 IP series cameras
using Internet Explorer, SuperLive Plus, N Control 6000
1 x line-in (RCA) / 1 x HDMI, 1 x line-out (RCA)
192 Mb/s in total from all cameras
continuous, triggered by: manual, alarm input, motion detection, intelligent image analysis functions
up to 5 s/up to 600 s
960 fps (32 x 30 fps)
480 fps (16 x 30 fps)
|Recorded Data Search|
by date/time, events, image analysis events, POS, motion in a defined area, related to face recognition, tags, license plate number
USB port (HDD or Flash memory), network
|Backup File Format|
MP4, AVI, RPAS (player included)
available mount: 4 x HDD 3.5” 10 TB SATA
|Total Internal Capacity|
1 x eSATA
|Total External Capacity|
|Internal Alarm Input/Output|
16/4 relay type
|Camera Alarm Input/Output|
supports IP camera’s alarm input/output
supports camera’s motion detection
|System Reaction to Alarm Events|
buzzer, e-mail, alarm output activation, recording activation, PTZ, e-mail with atatchment, Full Screen, PUSH message, voice prompt, snapshot
|Intelligent image analysis|
Exception, Scene Change, Video Blurred, Video Color Cast, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Face Recognition, Perimeter Intrusion Detection by pedestrian or vehicle, Line Cross Detection by pedestrian or vehicle, Analysis of Recognized Number Plate Numbers (LPR)
50000 license plates
face recognition for 6 NOVUS 6000 series IP cameras with 'F' in the model name or 2 ONVIF cameras
2 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s
16 x Ethernet PoE (IEEE802.3af/at, Class 4) - RJ-45 interface, 10/100 Mbit/s, with Extended mode
|Network Protocols Support|
HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, IEEE 802.1X, PPPoE, SMTP, P2P, POS, HTML5
NOVUS MANAGEMENT SYSTEM VSS, NOVUS MANAGEMENT SYSTEM AC, NMS, Internet Explorer, Firefox, Chrome, Opera, N Control 6000, Edge/Safari, N Control 6000
SuperLive Plus (iPhone, Android)
|Number of Simultaneous Connections|
up to 128 clients, up to 36 main streams or 128 substreams or 32 playback streams in total
192 Mb/s in total to all client workstations
pan/tilt/zoom, preset commands
1 x USB 3.0, 2 x USB 2.0
languages: Polish, English, others
PC mouse and IR remote controller (in-set included), network
automatic control of: HDDs, network, camera connection loss
password protection, IP filtering, MAC filtering, ARP guard
440 (W) x 70 (H) x 390 (D)
4.4 kg (without HDD)
100 ~ 240 VAC
60 W (with 4 HDDs) + 150 W PoE
-10°C ~ 50°C
|RACK Mount 19"|
|NVR, NHDR with IP cameras compatibility_Kompatybilnosc rejestratorow i kamer IP_07.09.2023.xlsx||Compatibility table||
|Face recognition Rozpoznawanie twarzy.pdf||User manual||
|VCA_6000VSS_PL Instrukcja konfiguracji i obsługi funkcji analizy obrazu kamer Novus serii 6000 VSS.pdf||User manual||
|Image analysis - camera installation guidelines_wskazówki instalacji kamer_EN_PL_v1.0.pdf||User manual||
|NVR6000 rekomendacja bezpieczeństwa.pdf||Installation and Maintenance Manual||
|N Control 6000 x64 Ver126.96.36.19930.exe.zip||Software||
|N Control 6000_ver188.8.131.5230.pkg_.zip||Software||
|PoE standards overview_Porównanie standardów PoE_EN_PL_v1.0.pdf||Others||